FREN

Everything you need to know before you get started

Regulations, lead times, sizing: answers to the questions fleet operators ask before deploying a hydrogen station.

FAQ

Frequently asked questions

Our products

What is the difference between Nano, the Mhycro, the MinHy and the TinHy?

Nano is an automated compression test bench (437 and 875 bar outputs) that tests the leak-tightness of hydrogen circuits in vehicles and installations. The Mhycro is an ultra-compact mobile station (under 5 m², under 20 kg H₂/day, 350 or 700 bar), available for rental. It validates a use case in real-world conditions. The MinHy is a permanent containerised station (≈ 20 m², 60 to 120 kg H₂/day and 350 and/or 700 bar depending on configuration) for day-to-day operation. The TinHy is a compact electrolyser (40 bar output) that produces hydrogen on site. Nano tests, the Mhycro validates, the MinHy operates, the TinHy produces.

What fleet size are Enhywhere stations suited to?

Our stations are designed for captive fleets. The Mhycro covers the validation phases on a handful of vehicles. The MinHy covers permanent operation, 60 to 120 kg of hydrogen per day depending on configuration. Beyond that, expansion by adding storage and compression modules is sized case by case.

Can you rent a hydrogen station before investing?

Yes. The Mhycro is offered for rental only. Renting lets you validate your use case in real-world conditions before making any major investment. The data collected during the rental is then used to size the MinHy. Terms are quoted after an initial discussion about your fleet.

How much does a compact hydrogen station cost?

The price depends on sizing: capacity, pressure(s), buffer storage, monitoring, maintenance. Each station is quoted individually following a study based on your actual needs. Contact us for a study tailored to your fleet.

Which vehicles can be refuelled?

Any vehicle or machine fitted with a tank compatible with 350 bar (heavy goods vehicles, buses, industrial and agricultural machinery, boats) or 700 bar (light vehicles, vans). Our stations have already refuelled the Toyota Mirai, Alpine Alpenglow, Ligier JS2 RH2 and autonomous vineyard straddle tractors.

Where are Enhywhere stations manufactured?

Our stations are designed, assembled and tested in our workshop in the Paris region (Île-de-France). Find out more about Enhywhere.

Installation and regulations

How long does it take to install a hydrogen station?

Our stations are integrated and factory-tested before delivery. Installation and commissioning take place on a prepared site, with no dedicated foundations. The full project, from study to first fill, takes months, compared with 18 to 36 months for a large-capacity station requiring civil works. The ICPE (online declaration) and planning procedures are prepared in parallel with manufacturing.

Which regulations apply to a hydrogen station in France?

A hydrogen station falls under the ICPE regulations: heading 1416 once it dispenses 2 kg of hydrogen per day (declaration with periodic inspection), and heading 4715 according to the quantity of hydrogen present (declaration from 100 kg to less than one tonne, authorisation above). The equipment is designed to Directives 2014/68/EU (pressure equipment) and 2014/34/EU (ATEX). Filling relies on SAE J2601 and design on ISO 19880-1. We provide the technical elements of the file: drawings, P&ID, input for the ATEX analysis.

Do you need planning permission?

It depends on the footprint. A new structure with a footprint of more than 5 m² and up to 20 m² requires a prior works declaration. Above 20 m², a building permit is required (French planning code, articles R.421-1 and R.421-9). In protected areas, further formalities apply (opinion of the heritage architect). This planning step comes on top of the ICPE procedure, it does not replace it: the feasibility study identifies both with the municipality, subject to review by the competent authorities.

Which hydrogen source should you use?

The MinHy accepts three sources: hydrogen delivered by truck, in tube trailers or cylinder bundles, the most common at the outset; an on-site electrolyser such as the TinHy; or a pipeline in equipped industrial zones. The choice depends on volume, hydrogen cost, local availability and your decarbonisation objectives. The feasibility study covers this analysis.

Request a study